A Plant Growth System Nano is a desirable solution for precise CO2 dosage for small aquariums. CO2 addition benefits the growth of all plants and improves colour development.


 

  • A complete CO2 system with an elegant nano design
  • A precise and stable CO2 regulation
  • A 3-in-1 diffuser, which ensures a maximum CO2 efficiency

How to use the product

  • Ensure that the regulator is fully off before you mount the regulator on the CO2 cartridge.
  • Fill the diffuser-chamber with water.
  • Place the cartridge in the rack, slide the suction cups on the hose and mount the hose to the regulator and the diffuser.
  • Mount the diffuser with the suction cups at the inner side of the tank near the bottom and place the hose in the back corner.
  • Leave the diffuser for 24h in the tank to ensure that the ceramic disc is fully moistened.
  • Open the regulator carefully and count the number of bubbles per minute in the diffuser-chamber.
  • Wait 5 minutes, adjust and repeat until the number of bubbles per minute is similar to the recommendation in the table.

 

The table shows recommended dosage (bubbles per minute) in different tank sizes. A 95 g CO2 cartridge contains 50,000 ml CO2.

The most important nutrient for plants is CO2.

The natural CO2 level in an aquarium is 0-0.5 mg/L of water.
Even the slightest addition of CO2 can make a big difference improving the growth and vigour of the plants.

If the aquarium contains only slow-growing  Easy-plants, the addition of CO2 gas into the water should reach a level of approx. 3 mg/L to ensure good growth conditions.

For Medium category plants the CO2 requirement is approximately 10 mg/L and for Advanced plants approx.  25 mg/L.

*) If you have a larger aquarium containing   Medium or Advanced plants, the lifetime of a nano-cartridge will be too short. In this case we recommend a larger cylinder e.g. 2 kg refillable.

All figures are approximate.

CO2 System Nan

C$151.99Price
     

    +12897833210

    ©2020 by siriusaquatics.com 
    Proudly Canadian